-30%

LED Lamp – Pandora Hyperion R2+

Availability:

15 in stock


1,574.30 2,249.00

Previous lowest price was 2,249.00.

LED Lamp – Pandora Hyperion R2+

Combo unit T5+LED
Pandora Hyperion R2+ is a combination LED + T5 hybrid lamp bringing the best of both light sources together. It is equipped with our newest Hyperion R2+ LED panel made in SMT technology (square matrix technology).
Side by side lamp comparision with ATI LED Powermodule
Pandora Hyperion R2+ lamps can easily penetrate water over 36″ deep.

Pandora Hyperion R2+  is available in 4 sizes covering a wide range of tanks.

See specs and coverage details about the Pandora Hyperion R2+ LED Lamp below.

SMT (Square Matrix Technology – the same like in Hyperion S panels) provides the perfect mix of colors all LED channels and an extraordinary visual experience – very strong shimmer at the bottom of the aquarium comparable to metal halide. Pacific Sun lamp has been designed as a pendant lamp for open aquariums.

It must not be used in enclosed aquariums below the canopy.

Hyperion R2+ panels include also warm white leds – so it’s a main difference between Hyperion S (no white leds) and Hyperion R2+ series.

Colour: Pearl white

Models with 135W LED panels made in SMT technology:

  • Pandora Hyperion R2+ 135W + 2x24W T5 – cover area up to 100x80x80cm, weight 8kg
  • Pandora Hyperion R2+ 2x135W + 4x39W T5 – cover area up to 125x80x80cm, weight 12kg
  • Pandora Hyperion R2+ 3x135W + 4x54W T5 – cover area up to 165x80x80cm, weight 15kg
  • Pandora Hyperion R2+ 4x135W + 4x80W T5 – cover area up to 225x80x80cm, weight 18kg

Available in colors: pearlwhite(default) and anthracit.

LED panels:

The Hyperion R2+ (SMT) panel includes the following LED colors:

  • UV (400 and 420nm) – Made for Pacific Sun
  • Royal Blue 450nm – Cree
  • Royal Blue 465nm – Cree
  • Blue – Cree
  • Green – Cree
  • Red
  • Orange
  • Warm White – Cree

LED Lamp Pandora Hyperion R2+ General Specifications:

  • Size: 600x320x50mm(single LED panel) ; 900x450x50mm(two LED panels); 1250x450x50mm(three LED panels) ; 1650x450x50mm (four LED panels)
  • 8 independent LED channels + independent T5 programming
  • LED panels: 135 watts
  • 2pcs / 4pcs T5 bulbs with high quality Alanod anodized (silver coated) aluminum reflectors 98% light reflection – T5 bulbs not included
  • Light coverage: see above
  • “Shallow Water” LED panel technology without the use of any white diodes specially designed for optimal coral growth according to Pacific Sun.
  • Built-in light controller that can be accessed wirelessly via bluetooth. The fixture also includes a backlit blue LCD Display. Users can simulate sunrise / sunset, clouds, weather special programs, etc.
  • Supported software: Win 7/Xp/8, Mac OS X, Android
  • External control (PWM or 1-10V signal)
  • “Ultra Quiet” 80mm fans controlled by a temperature sensor.
  • Mounting: Hanging kits or Pacific Sun “Spider” mount
  • lamps have protection glass
SKU: N/A Category:
Weight N/A
Model

Pandora Hyperion R2+ 2x135W + 4x39W T5, Pandora Hyperion R2+ 3x135W + 4x54W T5, Pandora Hyperion R2+ 4x135W + 4x80W T5

Plug

UK power supply/plug, EU power supply/plug, USA power supply / plug, Australia power supply/plug

Downloads

Go to Download Page

To check which software is proper for your lamp – turn off the lamp power, wait a few seconds – then plug it in again, looking at the LCD screen –  after a few seconds, you will see on the screen the firmware version information contained in the flash memory of the processor.It is extremely important – because with this information, you will know what version of firmware is right for you. Uploading incorrect firmware version may damage your lamp (and will cost you a trip to the repair service).
In case of improper operation by the PC software (breaking the connection, no connection, etc) – just follow these steps:

  1. uninstall the controlling software
  2. Remove the lamp from the authorized BT devices (via the control panel / bluetooth  manager)
  3. Restart your computer
  4. install the application (the latest downloaded from this site – or a lamp attached to the CD)
  5. search for a lamp – and reconfigure the BT connection – remember to use code 1234 to paired flash

If errors persist – please contact us with the name / model of lights – and information about your BlueTooth interface and operating system installed on your computer.

SHOPPING CART

close