Pandora Hyperion S


8 in stock

Pandora Hyperion S is a combination LED + T5 hybrid lamp bringing the best of both light sources together. It is equipped with our newest Hyperion S LED panel made in SMT technology(NO WHITE LEDs). More informations about SMT technology “S” stands for shallow as the new LED panels gives off a remarkable turquoise blue color replicating the tropical sun shimmering in the shallow reefs of Bali. Pandora Hyperion S lamps can easily penetrate water over 36″ deep. Pandora Hyperion S is available in 4 sizes covering a wide range of tanks. See specs and coverage details below. SMT (Square Matrix Technology) provides the perfect mix of colors all LED channels and an extraordinary visual experience – very strong shimmer at the bottom of the aquarium comparable to metal halide.
Pacific Sun lamp has been designed as a pendant lamp for open aquariums. It must not be used in enclosed aquariums below the canopy.





  • Stainless steel construction
  • Fully wireless control
  • On-board LCD blue-back lit LCD display
  • Silent variable speed cooling fans (2 per LED panel)
  • Modular, full upgradable, solder-less internal construction (LED panels, drivers, computer and fans)
  • Full spectrum output (UV – Red)
  • 9 independent channels of control
  • Non-optic construction for unparalleled spread and even distribution
  • Proprietary software for unlimited control
  • Pre-programmed PAR scenarios and customizable programming
  • Wireless software/firmware upgrades
  • Wire suspension kit and on tank Spider Mount rails for installation
  • Size/power and coverage area
  • Available in colors: pearlwhite(default) and anthracit.

Models with 145W LED panels made in SMT technology:

  • Pandora Hyperion S 145W + 2x24W T5 – cover area up to 100x80x80cm, weight 8kg
  • Pandora Hyperion S 2x145W + 4x39W T5 – cover area up to 125x80x80cm, weight 12kg
  • Pandora Hyperion S 3x145W + 4x54W T5 – cover area up to 165x80x80cm, weight 15kg
  • Pandora Hyperion S 4x145W + 4x80W T5 – cover area up to 225x80x80cm, weight 18kg

Models with 75W LED panels made in SMT technology:

  • Pandora Hyperion S2 75W + 2x24W T5 – cover area up to 100x80x80cm, weight 8kg
  • Pandora Hyperion S2 2x75W + 4x39W T5 – cover area up to 125x80x80cm, weight 12kg
  • Pandora Hyperion S2 3x75W + 4x54W T5 – cover area up to 165x80x80cm, weight 15kg
  • Pandora Hyperion S2 4x75W + 4x80W T5 – cover area up to 225x80x80cm, weight 18kg

New series Pandora Hyperion S with 8pcs T5 tubes:

  • Pandora Hyperion S2 75W + 8x24W T5 – cover area up to 100x100x80cm, weight 12kg
  • Pandora Hyperion S2 2x75W + 8x39W T5 – cover area up to 125x100x80cm, weight 15kg
  • Pandora Hyperion S2 3x75W + 8x54W T5 – cover area up to 165x100x80cm, weight 18kg

LED panels

The Hyperion S(SMT) panel includes the following LED colors:

  • UV (400 and 420nm) – Made for Pacific Sun
  • Royal Blue 450nm – Cree
  • Royal Blue 465nm – Cree
  • Blue – Cree
  • Cyan – Made for Pacific Sun
  • Green – Cree
  • Amber – Made for Pacific Sun
  • Deep Red – Made for Pacific Sun

General Specifications:

  • Size: 600x320x50 mm (single LED panel, 2xT5); 900x450x50 mm (two LED panels, 4xT5); 1250x450x50 mm (three LED panels, 4xT5); 1650x450x50 mm (four LED panels)
  • 650x620x50 mm (single LED panel, 8xT5); 950x620x50 mm (two LED panels, 8xT5); 1250x620x50 mm (three LED panels, 8xT5)
  • 9 independent LED channels + independent T5 programming
  • LED panels: 145 watts / 75 watts
  • 2pcs / 4pcs T5 bulbs with high quality Alanod anodized (silver coated) aluminum reflectors 98% light reflection
  • Light coverage: see above
  • “Shallow Water” LED panel technology without the use of any white diodes specially designed for optimal coral growth according to Pacific Sun.
  • Built-in light controller that can be accessed wirelessly via bluetooth. The fixture also includes a backlit blue LCD Display. Users can simulate sunrise / sunset, clouds, weather special programs, etc.
  • Supported software: Win 7/Xp/8, Mac OS X, Android
  • External control (PWM or 1-10V signal)
  • “Ultra Quiet” 80mm fans controlled by a temperature sensor.
  • Mounting: Hanging kits or Pacific Sun “Spider” mount
SKU: N/A Category:


Go to Download Page

To check which software is proper for your lamp – turn off the lamp power, wait a few seconds – then plug it in again, looking at the LCD screen –  after a few seconds, you will see on the screen the firmware version information contained in the flash memory of the processor.It is extremely important – because with this information, you will know what version of firmware is right for you. Uploading incorrect firmware version may damage your lamp (and will cost you a trip to the repair service).
In case of improper operation by the PC software (breaking the connection, no connection, etc) – just follow these steps:

  1. uninstall the controlling software
  2. Remove the lamp from the authorized BT devices (via the control panel / bluetooth manager)
  3. Restart your computer
  4. install the application (the latest downloaded from this site – or a lamp attached to the CD)
  5.  search for a lamp – and reconfigure the BT connection – remember to use code 1234 to paired flash

If errors persist – please contact us with the name / model of lights – and information about your BlueTooth interface and operating system installed on your computer.