-30%

LED Lamp – Metis Hyperion R2+

Availability:

4 in stock


8 channel, wireless control LED lamp

Metis Hyperion R2+ is the latest generation of lamp based on proven and very popular lamp – Metis Hyperion R2.

It is equipped with our newest Hyperion R2+ LED panel made in SMT technology(Square Metrix Technology).

Metis Hyperion R2+ lamps can easily penetrate water over 30″ deep.

Metis Hyperion R2+ is available in 3 sizes covering a wide range of tanks. See specs and coverage details below. SMT (Square Matrix Technology) provides the perfect mix of colors all LED channels and an extraordinary visual experience – very strong shimmer at the bottom of the aquarium comparable to metal halide. Pacific Sun lamp has been designed as a pendant lamp for open aquariums. It must not be used in enclosed aquariums below the canopy.

804.301,399.30

LED Lamp – Metis Hyperion R2+

8 channel, wireless control LED lamp

Metis Hyperion R2+ is the latest generation of lamp based on proven and very popular lamp – Metis Hyperion R2.

It is equipped with our newest Hyperion R2+ LED panel made in SMT technology(Square Metrix Technology).

Metis Hyperion R2+ lamps can easily penetrate water over 30″ deep.

Metis Hyperion R2+ is available in 3 sizes covering a wide range of tanks. See specs and coverage details below. SMT (Square Matrix Technology) provides the perfect mix of colors all LED channels and an extraordinary visual experience – very strong shimmer at the bottom of the aquarium comparable to metal halide. Pacific Sun lamp has been designed as a pendant lamp for open aquariums. It must not be used in enclosed aquariums below the canopy.

Size/power and coverage area

Models with 135W LED panels made in SMT technology(called Metis Hyperion R2+):

  • Metis Hyperion R2+ 2x135W – cover area up to 125x70x70cm, weight 6 kg
  • Metis Hyperion R2+ 3x135W – cover area up to 165x70x70cm, weight 8 kg
  • Metis Hyperion R2+ 4x135W – cover area up to 225x70x70cm, weight 10 kg
  • Available in colors: pearlwhite(default) and anthracit.

LED panels

The Hyperion R2+ (SMT) panel includes the following LED colors:

  • UV (400 and 420nm) – Made for Pacific Sun
  • Royal Blue 450nm – Cree
  • Royal Blue 465nm – Cree
  • Blue – Cree
  • Green – Cree Red
  • Orange
  • Warm White – Cree

General Specifications:

  • Size: 850x130x50mm(two LED panels); 1250x130x50mm(three LED panels) ; 1650x130x50mm (four LED panels)
  • 8 independent LED channels
  • LED panels: 135 watts
  • Light coverage: see above
  • “Shallow Water” LED panel technology without the use of any white diodes specially designed for optimal coral growth according to Pacific Sun.Built-in light controller that can be accessed wirelessly via bluetooth. The fixture also includes a backlit blue LCD Display. Users can simulate sunrise / sunset, clouds, weather special programs, etc.
  • Supported software: Win 7/Xp/8, Mac OS X, AndroidExternal control (PWM or 1-10V signal) – on request
  • “Ultra Quiet” 80mm fans controlled by a temperature sensor.
  • Mounting: Hanging kits or Pacific Sun “Spider” mount

Metis Hyperion R2+have the same coverage area like Metis Hyperion S.

SKU: N/A Category:
Weight N/A
Model

Metis Hyperion R2+ 2x135W, Metis Hyperion R2+ 3x135W, Metis Hyperion R2+ 4x135W

Color

Antrazit, Pearl White

Plug

UK power supply/plug, EU power supply/plug, USA power supply / plug, Australia power supply/plug

Downloads

Go to Download Page

To check which software is proper for your lamp – turn off the lamp power, wait a few seconds – then plug it in again, looking at the LCD screen –  after a few seconds, you will see on the screen the firmware version information contained in the flash memory of the processor.It is extremely important – because with this information, you will know what version of firmware is right for you. Uploading incorrect firmware version may damage your lamp (and will cost you a trip to the repair service).
In case of improper operation by the PC software (breaking the connection, no connection, etc) – just follow these steps:

  1. uninstall the controlling software
  2. Remove the lamp from the authorized BT devices (via the control panel / bluetooth  manager)
  3. Restart your computer
  4. install the application (the latest downloaded from this site – or a lamp attached to the CD)
  5. search for a lamp – and reconfigure the BT connection – remember to use code 1234 to paired flash

If errors persist – please contact us with the name / model of lights – and information about your BlueTooth interface and operating system installed on your computer.

SHOPPING CART

close